Anemometer with pre-alarm and full alarm / wind speed display

This wind speed alarm controller is suitable for lots of different applications. The anemometer can measure the slightest wind movements.
The wind alarm controller can be used to monitor the current wind speed but also to get an average value of the wind velocities measured in the last two or five minutes. If wind speeds are higher than the preset values, a pre-alarm is first applied before the full alarm is emitted. Both alarms are visual and audible.

Radio transmission/ Power supply 110 … 230V AC or +24V DC

Wind Speed Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The Wind Speed Meter PCE-WSAC 50W 230 is equipped with alarm relay for a prealarm or main alarm. Due to the high measuring range of up to 50 m / s of the anemometer, stormy gusts can also be monitored. The radio range of the anemometer is in the open field up to 750 m / 2500 ft in the free frequency band of 2.4 GHz. When installing the display of the anemometer PCE-WSAC 50W 230 in buildings, a range of up to 60 m / 200 ft can be achieved for the wind sensor.

AIR AND TEMPERATURE METER PCE-VA 11

Air and Temperature Meter PCE-VA 11 for air temperature and infrared temperature / Extreme value measurement/ Measurement ofair velocity and volume flow / Backlit LCD / Measurement in°C and °F / Measurement of m/s, km/h, ft/min, knot, mph

The Temperature Meter PCE-VA 11 is an extensively used measuring instrument. The temperature meter provides the opportunity to determine air speeds, air temperature and infrared temperature. The backlit LCD allows comfortable readings and facilitates use in dimly lit areas. To mount the windmill it has a thread on the back. Here it is possible to mount the wind meter on a thread. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values and can optionally be backlit, which makes the wind meter useful even in low light conditions. Immediately after the impeller has been connected, the measurement can be started and measured values are immediately displayed on the display. Even if a specific temperature is to be measured at special measuring spots, this is possible by means of simple keystroke.

MULTIFUNCTION AIRFLOW TEST INSTRUMENT PCE-VA 20

Combination anemometer-hygrometer-thermometer for assessing wind, weather, indoor / Outdoor environmental climate conditions

PCE-VA 20 is a multifunction airflow test instrument for assessing wind, weather, indoor / outdoor environmental climate conditions as well asfor testing heating, ventilation and air conditioning or cooling (HVAC) systems. In addition to measuring air flow velocity (i.e., wind speed), thismultipurpose handheld device measures volume flow, relative humidity (RH), air temperature, dew point temperature and wet-bulbtemperature. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9″ Ø fan impeller, easy-to-read backlit LCD, andfunctions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, andmetric or imperial unit selection.

THERMAL / HOT WIRE ANEMOMETER PCE-423N

Thermal / Hot Wire Anemometer with data memory / Measuring range 0 … 30 m/s (98 ft/s) / Micro-USB interface / 3/8″ tripod mount / CSV file format / Rechargeable battery / Telescopic probe extendable up to 426 mm (16.7″)

The thermal / hot wire anemometer has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the hot wire anemometer can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access. This means that the hot wire anemometer can be used to measure flow in cooling fins or in supply and exhaust air ducts.

The air quality data logger PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The air quality data logger is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure. All these parameters give the occupational safety expert information about the air quality. The measured values ​​are stored by the CO2 air quality data logger on an SD memory card.

AIR QUALITY METER PCE-COG 10

Air quality meter with data memory for 5000 measuring points / Temperature, humidity / Export of the saved measurement data in CSV format / Battery and mains operation / 1/4 inch tripod mount / Measuring range (CO²) 0 … 9999 ppm, (CO) 0 … 1000 ppm

The air quality meter has a measuring range of 0 … 9999 ppm. In addition to the carbon dioxide measurement, the air quality detector also has a carbon monoxide (CO) sensor with a measuring range of 0 … 1000 ppm and a temperature and humidity sensor. The air quality detector already covers a large range of measuring tasks. The air quality detector is therefore used, for example, in occupational safety to check the climatic conditions in office workplaces.

Units: lux, footcandle / Micro-USB interface

The lux meter has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the lux meter can be positioned appropriately for every measuring task. The measured values can be displayed by the lux meter in lux and in footcandles. In addition to the normal measured value display on the lux meter, the measured value is also displayed on a scale. The lux meter has additional functions so that an analysis of the illuminance can be carried out. With the additional functions of the lux meter, the largest and smallest measured value can be output using the “MIN” and “MAX” buttons.

PCE-LED 20 LED LIGHT METER
Handheld lux meter with automatic range selection, displays measuring units in lux or footcandle

PCE-LED 20 is a light meter with an external LED light sensor. The cable of the sensor has an extended length of approx. 1.5 m / 4.9 ft. Different work or production processes require different lighting conditions. In school, office and factory environments, lighting must also meet applicable safety standards. Indoor lighting conditions can be assessed quickly and easily using this meter. The LED light meter or lux meter can display measured values directly on the display. A direct measurement is thus immediately possible. By means of various presets, the functions installed in the device can also be activated or deactivated. These functions include the normal HOLD function, in which the measured value is frozen in the display. In addition, the extreme values as well as the average value can be frozen in the display. Further functions of the LED lux meter are the zero adjustment, the automatic shutdown and the automatic range selection.

Class II with octave band filter / A, B, C and Z frequency weightings

PCE-428 is a class 2 data-logging sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. Thanks to octave band filtering, even the slightest difference in frequency is detected. The handheld meter also functions as a data logger, recording measurements at an adjustable interval from 1 s … 24 h and storing the recorded measurement data to a micro SD card memory. The SD card can be removed from the meter and inserted into the SD card reader of a PC.

Class 1 with 1/1 octave band / A, B, C & Z Frequency weighting

PCE-430 is a class 1 sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. Thanks to octave band filtering, even the slightest difference in frequency is detected.
The handheld meter also functions as a data logger, recording measurements at an adjustable interval from 1 s … 24 h and storing the recorded measurement data to a micro SD card memory. The SD card can be removed from the class 1 sound level meter and inserted into the SD card reader of a PC.

DECIBEL METER PCE-322A
Class II sound level meter with data-logging functionality / Measuring range: 30 … 130 dB / Memory stores up to 32,700 readings / USB port / Microsoft Excel compatible / Analog output

PCE-322A is a handheld, portable, professional Class II sound level meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time. A mini tripod is included in the delivery contents, as is a wind noise suppressor. The recorded decibel readings help users determine if and what protective measures need to be taken to ensure overall health, safety and productivity in industrial, commercial, occupational, educational and residential environments. The decibel meter can also be used to evaluate acoustics for audio installations.

Class I / Sound pressure level 94 and 114 db

The sound calibrator is a battery powered sound source. With the sound calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out. Sound level sensors of 1, ½ and ¼ inch can be connected to the sound calibrator and checked via the adapter attachments. The calibration frequency for the sound calibrator is 1000 Hz. This is the reference frequency for the internationally standardized evaluation curves. With this sound calibrator you can calibrate sound measuring devices with weighting filters A, B, C, or D. The calibration pressure for this sound calibrator is 94 ± 0.3 dB (1 Pa) and 114 ± 0.3 dB (10 Pa).

MANIFOLD PCE-HVAC 10

MANOMETER PCE-MPM 10

MULTIFUNCTION MANOMETER PCE-HVAC 2

Measures air velocities up to 80 m/s (178.66 mph) / Zero, minimum, maximum, average, record and hold functions / Stores to memory up to 99 measurement values per parameter

MANOMETER PCE-PDA 01L

PCE-PDA Series Manometer
Pressure gauge for relative and differential pressure / Pitot tube adaptable to differential pressure gauge / MAX MIN function / Data logger

The differential pressure gauges of the PCE-PDA series are reliable differential pressure gauges for pressure measurement of gases in the range of ± 200 Pa, ± 2kPa and 20 kPa depending on the model. The differential pressure gauge has many different pressure measuring functions. This gives the user more than 16 units. Furthermore, the differential pressure gauge measures in addition to the differential pressure, the temperature, flow velocity and volume flow. In addition, the maximum and minimum differential pressure can be displayed in the two-part graphic display. The resolution of the differential pressure can optionally be switched. The differential pressure gauge incorporates a high-precision mode that increases the resolution tenfold.

PRESSURE GAUGE PCE-BDP 10