Data Acquisition (DAQ) for R&D and Testing Applications
MEMORY HiCORDER MR8740T
• Test high performance ECU boards • Multi-point testing of engine, driving, and ride comfort management systems • Record signals captured by various sensors to identify air flow, throttle, torque, speed, vibration, humidity, etc.
• Max. 108ch Analog to Max. 96ch Analog + 48ch Logic
• 20M-Sampling/s
MEMORY HiCORDER MR6000
• Test ECUs, inverters and motors • Measure large currents in the fields of solar power and EV/HEV/PHEV development • Measure inverter and switching power supply signals with direct input
• Max. 32ch Analog to 128ch Logic
• Max. 200M-Sampling/s (16ch)
• 1G-Word Memory (1ch)
MEMORY HiCORDER MR8847A
• Operation testing and evaluation of inverters and UPS during load fluctuation and switching • Analyze the relationship between engine control and vibration during vibration testing • Identify power fluctuations when power supply is cycled
• Max. 16ch analog to 64ch logic
• 20M-Sampling/s
• 12-bit/16-bit A/D resolution
MEMORY HiCORDER MR8827
• Multi-channel performance ideal for trial runs after the scheduled maintenance of railway cars to verify for voltage command signals, motor current, car speed, and brake pressure • Evaluate inverters and UPS • Transformer interruption testing
• Max. 32ch Analog to 64ch Logic
• 20M-Sampling/s
• 12-bit/16-bit/24-bit A/D resolution
MEMORY HiCORDER MR8741
• Measure minute fluctuations in output from automobile sensors in automobiles and other equipment • Identify voltage fluctuations in devices such as batteries at high levels of precision and resolution • Function generator, arbitrary waveform generator, and waveform measurement in a single device
• Max. 16ch Analog to 64ch Logic
• 20M-Sampling/s
• 12-bit/16-bit A/D resolution
MEMORY HiCORDER MR8740
• Measure minute fluctuations in output from sensors in automobiles and other equipment • Identify voltage fluctuations in devices such as batteries at high levels of precision and resolution • Function generator, arbitrary waveform generator, and waveform measurement in a single device
• Max. 54ch Analog to 112ch Logic
• 20M-Sampling/s
• 12-bit/16-bit A/D resolution
MEMORY HiCORDER MR8875
• Measure acceleration fluctuation in automobiles, transportation equipment and industrial robots • Performance and durability testing • Inverter and motor testing
• Max. 16ch Analog + 8ch Logic
• 60ch scanner
• 500k-Sampling/s
Data Acquisition (DAQ) for Service and Maintenance Applications
MEMORY HiCORDER MR8870
• Elevator maintenance, machine, motor and inverter fault analysis, testing and inspections • Record motor rush current • Measure CB timing • Analyze sequence controller issues
• 2ch Analog + 4ch Logic
• 1M-Sampling/s
• Battery or AC-power
MEMORY HiCORDER MR8880
• Measure the startup current when a motor is powered on • Record PLC timing • Identify voltage drop during a power outage
• Max. 4ch Analog + 8ch Logic
• 1M-Sampling/s
• Battery or AC-power
Pen Recorders
PEN RECORDER PR8111, PR8112
• Corrosion protection maintenance or railroad tracks • Environmental testing using industrial sensors
• 1- or 2-pen chart recording of DC voltage signals
• Easy-to-use portable pen recorder
• Battery or AC-power
Memory Recorder Options
NON-CONTACT CAN SENSOR SP7001, SP7002
• Innovative non-contact CAN/CAN FD sensor that improves testing productivity
• Capture signals without affecting CAN bus or ECUs
• No need to alter vehicle cables
• High-sensitivity mode for hard to detect signals
VIR GENERATOR UNIT U8794
・ VIR signal generation unit for the MR8740T ・ Simulate signals of various sensors to inspect ECUs
・ DC voltage / current generation function
・ Resistance (simulated output) generation function
・ 8 channels
NON-CONTACT AC VOLTAGE PROBE SP3000
• Capture voltage signals from outside the wire cover
• Supports φ1mm to 2.5mm covered wires
• 10Hz to 100kHz frequency bandwidth
• 5Vrms 14Vp-p rated measurement voltage
ARBITRARY WAVEFORM GENERATOR UNIT U8793
・Signal generator module for Memory HiCorders ・Output up to 2 channels of arbitrary waveform for simulation testing
・10 mHz – 100kHz FG
・Max. 15 V output
・2 channels
PULSE GENERATOR UNIT MR8791
・Pulse output module for Memory HiCorders ・Conduct control simulation testing of control boards on equipment such as engine, airbags, brake systems, and power steering
・0.1 Hz to 20 kHz pulse
・Pattern output
・8 channels
WAVEFORM GENERATOR UNIT MR8790
・Waveform generator module for Memory HiCorders ・Generate signals that simulate voltage fluctuations at very low levels for simulation tests
・1 Hz to 20 kHz sine waveform output
・±10 V DC output
・4 channels
DIFFERENTIAL PROBE P9000
• Isolated testing of high voltage signals • Observe both instantaneous or RMS waveforms
• Waveform only for exclusive use with Memory HiCorders (P9000-01) or waveform/RMS value switchable (P9000-02)
• For use with input of up to 1 kV AC/DC
• Requires separate power supply
LOGIC PROBE MR9321-01
• Logic probe for Memory HiCorders • Detect power line voltage interruptions • High speed response
• 4 isolated channels
• ON/OFF detection of AC/DC voltage
• Large terminal type
CAN ADAPTER 8910
• Capture CAN-Bus information and convert them into analog/logic signals to input into your recorder or data logger
• 2 ch CAN inputs
• Analog 12 ch + 24-bit logic outputs
LOGIC PROBE 9327
• Detect the presence of voltage or relay contact signals with Memory HiCorders at high speeds
• 4 channels for contact voltage signals
• High-speed 100ns response
DIFFERENTIAL PROBE 9322
• Measure high voltage with Hioki Memory HiCorders • Analyze potential differences included in common mode voltages, such as IGBT • Inspect commercial power line waveforms, such as on 400V power lines
• For up to 2 kV DC or 1 kV AC
• Frequency bandwidth up to 10MHz
LOGIC PROBE 9320-01
• Detect the presence of voltage or relay contact signals with Memory HiCorders
• 4 channels for contact voltage signals
• 500ns response
• Miniature terminal type
Data Acquisition PC Software
FlexPro
• Multi-lingual, advanced software for analysis and presentation of Memory HiCorder data
• Third party software
• For detailed analysis of Memory HiCorder data
iPad App for Memory HiCorder HMR Terminal
• Multi-channel support of waveform data • Operate the Memory HiCorder via your network
• View Memory HiCorder data
• (Exclusively for Apple Inc. iPad) Free download from the App Store
WAVE PROCESSOR 9335
• Display waveform screens, X-Y graphs, and numerical results • Comprehensive search function
• For the Memory HiCorder
• Convert data, print and display waveforms
LAN COMMUNICATOR 9333
• Networking software to remotely control Memory Recorders via a LAN connection